Tweet
Shopping list :-
Parts used:-
1x 2500mm length 3" or 2.5" black plastic drainpipe (cost:- £5)
1x 62.5deg bend (cost:- £2.49) optional
1x 90deg bend (cost:- £2.99) optional
1 metre flexible reinforced rubber tubing to be a tight fit on plastic pipe for bends at windscreen and inside engine bay) (cost:- £15)
10 x 70mm jubilee clips ( number will vary dependent on your method of construction.) (cost:- approx 50 pence each)
1 metre of 20mm x 20mm x 1.5mm aluminium angle or 20mm x40mm channel (for brackets) (cost:- approx £ 2 )
1 metre of 30mm (or 40mm) x 1.5mm (or 2mm) aluminium strip (for brackets and clamps) (cost:- approx £6)
M6 bolts nuts and large washers
pop rivets
Tools Required:-
Screwdrivers
pliers
sharp knife
hacksaw
file
pop riveter
electric or cordless drill and 3mm,4mm, and 6mm HSS bits
Here's how it mounts to the side of the windscreen:-
Where it goes through the wing:-
Under the bonnet:-
И още, ъгъла на тръбата (90 градуса) на тавана, под шапката не ми се струва добра идея.
...
Коментар